Off Roading Forums banner

Front axle wrap?

1098 Views 6 Replies 3 Participants Last post by  WILL
I went out and played in the snow yesterday, and boy, I had some nasty axle wrap coming from the frontend of my YJ. Anyone have any experrience with this problem? Any suggestions for a cure? A few people have suggested putting in a factory style trac-bar to help cure the problem. Other than that, I can't think of what to do to fix it.
1 - 3 of 7 Posts
Do you have any idea how to cure it? I'll probably try longer front perches? But I'm not sure how much they'll help. A front trac-bar won't help with it at all? I know it's not an ideal setup.

Some more of you out there must have some experience with this.
Sounds nice and all, but where am I finding the room for one? The motor is right there, hanging down. I could build one, but I'd lose all sorts of clearance.

What other wrap prevention methods are there? I'll try longer perches. Could I add just a single mount to the axle to try and limit it some?
1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.