Off Roading Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
564 Posts
Discussion Starter · #1 ·
Trying to clean the back yard out a little. I have some axle housings and housings with some carrieres in them. There are no shafts in the axles except a rear.I have some other stuff also if you might want it, just some odds and ends. Let me know. TOM
 

· Registered
Joined
·
4,684 Posts
You are looking for the front diffs from a GV or XL7 manual tranny, as they are 4.30's. The gears don't need a can & spacer to work, unlike the Kick gears.

And the steel diff housing they come in are prized by Kick owners (ie. resell them) and the air-diff will pull $$$ on eBay
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top