Off Roading Forums banner
1 - 1 of 9 Posts

· Registered
6,355 Posts
/wwwthreads_images/icons/tongue.gif I use the little rubber-lined one-hole pipe hangars as described by Rods-In-Dirt. I try not to use plastic near steel or copper line because the plastic is abrasive enough to rub through the line over time./wwwthreads_images/icons/frown.gif Been there......had a plastic line cross the brake line at a 90 degree angle and it wore through, and the front brakes went away. The plastic line was an aftermarket gas line that some yahoo at an RV place installed when the Suburban was previously owned. That wasn't ALL they did wrong/wwwthreads_images/icons/frown.gif. I also had some army surplus aircraft clamps that were really nice.....rubber lined....worked good./wwwthreads_images/icons/smile.gif

Quadra-Tracs modified While-U-Wait by the crack moonguy/wwwthreads_images/icons/wink.gif Quadra-Trac Team./wwwthreads_images/icons/tongue.gif/wwwthreads_images/icons/smile.gif
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.