Off Roading Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
470 Posts
Discussion Starter · #1 ·
THANKS!!! The hardest part was finding a proper flywheel (153 tooth) that didn't cost an arm and a leg. I found one in a junk yard out of a 68 Camaro ss with a 396. I used the clutch from a 68 Monte Carlo with a 307 V8. It bolted right upto my little SR-4. It also, sadly, promptly wasted my rear yoke on my AMC 20. But, that is getting fixed. Thanks again.....



 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top