Off Roading Forums banner

Flywheel and clutch size

427 Views 1 Reply 0 Participants Last post by  **DONOTDELETE**
G
I just want to verify whether the flywheel and clutch is the same size for both the 258 6 cylinder and the 304 v8. Thanks

1 - 2 of 2 Posts
G
Depends on year and trans, there are some differences, some are 10 1/2 clutches, some are 11, some are 1 1/8 thickness, some are 1 1/16 thcikness. There is quite a lot of back and forth interchangability in there, some will, some won't. This probably sounds as confusing as it can be. At least they are all 10 spline!

Brad (from the 4 Wheeling center of the universe, 4 corners USA)
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top