Off Roading Forums banner
1 - 4 of 4 Posts
G

·
Discussion Starter · #1 ·
I going to be swapping a 350in my CJ-7 pretty soon, and are trying to get all my ducks in line. What are ya'll experience with motor mount kits from MORe, AA, and 4wheel dreve hardware, or are there anymore out there. I'm trying to get the best quality kit, strength, and ese of installation, not necessarly the cheapest.

/wwwthreads_images/icons/cool.gifAin't nothin to it but to do it/wwwthreads_images/icons/cool.gif
 
G

·
Discussion Starter · #2 ·
I went with MORE mounts for my 350. Bolted up without any problems. Have not had it on the road yet. They are pretty stout and i don't see strength being an issue.

 
G

·
Discussion Starter · #3 ·
DONT BUY THE 4WD HARDWARE ONES, THEY "*#@&%!" BIG TIME.
THE BUSHING ISNT STRONG ENOUGHT, I BROKE MINE FIRST TRIP
ON THE ROAD, NOT EVEN WHEELING.
JUNIOR

 

·
Registered
Joined
·
2,346 Posts
I went with MORE motor mounts. Nice fit. My frame is bent some, so I needed to add a small spacer between the frame and the MORE motor mount. The MORE motor mounts allow room for a HEI and a long water pump. I went with a 17" electric fan. I also used a 4 core 304 V8 radiator with the inlet/outlet switched for a SBC. I'm using a Lakewood bellhousing with a Ford T-18/Scout II Dana 300.
dave

 
1 - 4 of 4 Posts
Top