Off Roading Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
920 Posts
I had the same problem with my swap, and I forgot to hook up the PVC in the back of the motor on the pass. side and a broken vac line didn't help either. I replaced all my lines with silicone hose not that hard sh!t and my power is cool
. If that's not it I'd check the timing. 10 degrees BTC is factory.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top