Off Roading Forums banner

Electric Controlled Mico-Lock

1153 Views 3 Replies 0 Participants Last post by  **DONOTDELETE**
G
I have seen a 12V controlled solenoid for a Mico-Lock before. It saves all the brake line plumbing. You just need to plumb in the solenoid valve in your brake lines and run the wires to your dash. I think a line lock would work, but I want to control both front and rear systems. Anyone know who sells Mico-locks?
Sam

1 - 4 of 4 Posts
G
Mico leverlock is available through Raybestos part #66605 this is for the complete kit that includes a new safety switch that actuates the horn if brake pressure drops to an unsafe level.
good luck jjc

G
Thanks for the info!

G
I gave you the wrong part number (oops!) that number is for the old style leverlock. Your Rabestos or NAPA dealer should have a catalog listing what you need.
Again, sorry, jjc

1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top