Off Roading Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
423 Posts
I have heard that high pinion housings are different for oiling. Not very knowledgeable about that part. I do know for sure you will need reverse rotation gears or your wheels will be turning backwards!
 

·
Registered
Joined
·
423 Posts
are you talking about a two speed gear box on the axle? most folks put a doubler on the t-case. eliminates a gear box that way. as far as strong enough gears, extreme low gears are usually for control and crawling. if you don't thrash you should be fine
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top