Off Roading Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
4,893 Posts
i have seen 5.13 dana 44 gears... they are kinda small.. very few teeth.. i have never actually seen lower.. this guy was running 40's under a toyota and he had a 44 in the front

~~Elusive~~
it's sort of still a cj thingy....
 
G

·
Discussion Starter · #3 ·
John, the only lower gears I've heard of for the Dana 44 are 5.13 and 5.38. That doesn't mean there aren't others, just that I haven't
seen them.

Gary
 
G

·
Discussion Starter · #4 ·
That works for me. I knew that there were 5.13, and "thought" I'd seen something a little lower than that. 5.38 sounds like what I remember.
Thank /wwwthreads_images/icons/smile.gif

_____________________
John
95.5 YJ with "stuff"
http://SonsofThunder4x4.com
 
G

·
Discussion Starter · #5 ·
John, I did some looking around and on ORC in the axle tech section it list ring and pinion ratios for the D44 all the way out to 5.89.
It also says that not all ratios are available for all versions of thr D44.

Gary
 
G

·
Discussion Starter · #6 ·
5.89 is the deepest i have seen standard rotation.
6.14 is the deepest i have seen reverse rotation.

do note that the heads on the pinion on these are VERY small.

dan
Good things come to those who do research!!
 
G

·
Discussion Starter · #7 ·
So 5.89???? Wow, that's some deep gears. As for the small teeth, I can't imagine them being much smaller than the 4.88 gears for the D30.

With gears that deep, even my 4 banger could turn 35" tires.

_____________________
John
95.5 YJ with "stuff"
http://SonsofThunder4x4.com
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top