Off Roading Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,618 Posts
yes its bad.. you need a ballast resister... when you turn the engine over.. in the start position your coil should have around 10 or so volts.. then after it is started.. in the run position it should drop down to like 2-4 volts.. 12 volts constant will just burn up your coil way prematurely..

http://www.jeepgod.net

survival is instinct, but living takes guts
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top