Off Roading Forums banner
1 - 3 of 3 Posts
G

·
Discussion Starter · #1 ·
I'm sure this question has been asked a thousand times but could someone refer me to a good page for putting in a 350 on to a YJ frame.
I plan on slapping on a TH300 and Dana 300.
Thanks for your help.

 
G

·
Discussion Starter · #2 ·
I stayed with the NP231 but I did the same swap(I am assuming you mean a TH350) or TH400 I guess....anyway go to my website http://members.tripod.com/iluvjeeps and click on the My Jeep section and I did a whole write up on the process and there are pics there too. Any other questions let me know.

absolutjeep
 
G

·
Discussion Starter · #3 ·
Trevor Jones aka TJ has some info on his page. He also used a D300.

http://members.tripod.com/~TJ_86/jeep_detail.html

He is a good guy and Im sure he will answer any questions you might have.

Are you replacing the front axle to a one that has the pumpkin on the passenger side? If not, Im interested in how you plan to use the D300.

Good luck,

LarryM
85 CJ7, 350TBI ,T19 4spd
'00 TJ Sport, NV3550 5spd, D44, Teraflex system
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top