right bumper

here is a pic of the other leftbumper.. whoops...
mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm, tire clearance!
got zook?
http://www.geocities.com/bik3r
29x10.5x15 SS TSL *SX*, Calmini Header, SPOA, Lights, Dupicolor!

 

Re: right bumper

Looks great!! Gotta love the sawzall. Jim

http://sites.netscape.net/riodiusa

 

That's what I did to my stock bumper too. BODY BY SAWZALL
ROB

 

amazing what a sazzzall will do, might even have to git mine out to clear the 38s.
BiLLy bOb

Do unto others as you want done to you!
If you pack it in, pack it out!

 

wait a tick, I noticed you cut the ears that the bumper mounts to, so how did you mount it back up when you were done hackin? curious, cuz I'm getting a new zuk and it is minus the front bumper. Unfortunately the local law enforcement officials (read: fuzz) frown upon not having a front bumper so I will have to install my spare stock one for the time being. but this new rig has already had the ears cut off, so I didn't know how to mount them.

http://suzukisteve.rockcrawler.com

 

Good point Smitche.Ive been wondering that myself.I had to cut my ears as well,was gonna fab my own bumper but sure would like just to put stock back on.

 

I never removed the front bumper, I cut everything while it was still attached. See the picture and look @ the arrow.. There is a small lip on the bottom and the top, I did not cut the sides totally off (I think it looks better). I'll post some measurements this evening and more of the pictures. Izook.com will have this pretty soon also, so keep checking them too.. I am also thinking on trimming the existing side cap things to go back onto the bumper as an option. I dunno how it'll look though.. I'll keep everyone posted tho..

got zook?
http://www.geocities.com/bik3r
29x10.5x15 SS TSL *SX*, Calmini Header, SPOA, Lights, Dupicolor!

 

hmmm, can you take a picture of how the bumper mounts to you zuk? from the pictures it looks as if the mounting ears have been cut off and I would really like to know how it mounts so I can do it on mine.

http://suzukisteve.rockcrawler.com

 

Good question, I just cut off the ears and left the bumper alone. I dunno how it is connected, I'll check right now.. okoookokokk, I can see how you all are looking @ me like I have a frog growing out of my head. Check out my link: http://www.geocities.com/bik3r/suzuki/suzuki.htm
look @ the picture on the top and the second picture.. I've got some kinna front brush guard thing. The stock bumper alone is heald on by the ear things (I cut those away). My front bumper is now held on by that front brush guard thinggie.. There are 2 bolts on the top and the bottom of the bumper rests on the brush guard frame.. I'll see if there is a sollution for everyone without the brush guard..

got zook?
http://www.geocities.com/bik3r
29x10.5x15 SS TSL *SX*, Calmini Header, SPOA, Lights, Dupicolor, Z-bar, diamond plate rockers, tubes front, rear, & sides!

 

I looked at your zook on http://suzukisteve.rockcrawler.com/samurai.htm. It looks like your front bumper is only held on by the ears (ie. there are no exposed bolts bolting the bumper to the frame)

got zook?
http://www.geocities.com/bik3r
29x10.5x15 SS TSL *SX*, Calmini Header, SPOA, Lights, Dupicolor, Z-bar, diamond plate rockers, tubes front, rear, & sides!

 

ahhhh, now i'm seein' it. I'm gonna have to figure out a way to get it to attach without the ears. thanks for the info.
steve

Hey, what kinda frog is that growing outa your head?? /wwwthreads_images/icons/wink.gif

http://suzukisteve.rockcrawler.com

 

I did that awhile back on my zuk. The 215's didnt rub but i took the flares off so it looked stupid havin the bumper squared off. I just took a swanson speed square and made a line and cut them off with a sawzall.

I also cut the back bumper corners off. Now the bumper only goes along the bottom of the tailgate. It no longer wraps around the side.

Its a great mod and helps out tremendous.




Will
"It aint the wand its the magician"
"Keep the shiny side up"
Tread lightly