Off Roading Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,083 Posts
Discussion Starter · #1 ·
I just got an MRC Superbrain 959, and it false peaks everything! I'm used to mechanical chargers. I am using it to charge 1500mah nicds, 3000mah, and 3300mah nimh 6 cell packs. What peak voltage drop setting should I be using for both?
 

·
Registered
Joined
·
298 Posts
That charger should automatically adjust for either NiCd or NiMH depending on what is plugged into it. I use two of them for all my stuff. I charge 4&6cell 1100NiMH packs for my RC18T and Micro as well as 2400 Nicd and 3000 NiMH packs for 10th scale stuff. I have false peaks once in a while but not all the time. The packs should just be slightly warm when finished. The only adjustment I use is the charge amps.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top