Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
705 Posts
Concur, good cam! Use the Performer RPM manifold. And headers of course. The stock springs will work, but I recommend some fresh and a little stronger. Try the TRW Z-28 spring, VS-1008 I think? They are perfect for that cam and cheap too. I paid $30 for 16.
Try some Rhoads lifters too.

Chevota
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top