Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
2,062 Posts
jeepfreak1 ......bring the mentally challenged (me) up to speed here........(if I grabbed what Dave was getting at) if the CRANK had excessive end play ......and nothing holds the cam in except the chain .......and the crank was "forward" .......wouldn't the cam want to track out by the action of the chain trying to align? That is, wouldn't, in this "open" scenereo anyway, any crank end play .......also be cam end play (so to speak)? ...........so if one measured the crank end play ..............why don't you think that the cams free travel would match it?
Just curious......
GeeAea

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top