Off Roading Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
323 Posts
Discussion Starter · #1 ·
Ok I check all the stuff that you guys said to check, Crank endplay and a couple of other things. I put a new Timing set on it.

Here is what Fixed it. I put a New set of Lifters in it. The lifter were making the cam walk. Dont know why but it fixed it!

Hope to be running soon!



 
G

·
The reason that the lifters fixed the walking problem is that the AMC cam relies on the convex crown of the lifters along with a slight taper on the cam lobe surface to keep the cam rearwards in the block.

 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top