Off Roading Forums banner
1 - 2 of 2 Posts
G

·
Discussion Starter · #1 ·
im going to be putting the 2.5" superlift on the old truck here in about a month and i was planning on putting all new bushings on(pretty much the whole front end) im going to get the energy bushing kit i guess it has all the busshing for the front end and the leafs in the back i was wondering anyone who has done this how hard is it i have changed the bushings before on my 2 wheel and the drive and it wasnt that hard well any feed back will be appreciated thanks PJ

 

·
Registered
Joined
·
1,296 Posts
hey pj,
the torsion bars need to come out and you may have to burn out the old busshings. make sure you freeze the lower control arm bushings over night, that will help them go in easier. make sure you mark all the parts as to what setting they were at when in the truck so you won't have to struggle with after you put it all back together. you may have to cut the metal sleeve where those lowers go. (i did my buddy did not) e-mail me when you are ready to do it if you need help iu will go and help you with it.
lator....

 
1 - 2 of 2 Posts
Top