Off Roading Forums banner
1 - 1 of 1 Posts

·
Official Historian
Joined
·
8,340 Posts
i did the same upgrade last winter. the first motor i got, the shaft was too long. i took it back and got another one that turned out to be the right one. i even was able to stretch the original foam seal over the motor. i paid about $24 for the motor. i also agree that taking the seat out and the dash loose will give you plenty of room. i did the whole project in about five hours. for cutting the hole, i ended up using a jig saw with a metal cutting blade. i agree with everyone else that it was money and time well spent.

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top