I would be interested in the center console if it's grey. I would like to have the winshield wiper motor also. prices?

If your kidneys don't hurt, it's not a real Jeep!

 

Yes, the console is grey. Either myself or Mudman99TJ (jeremy) will email you with details this weekend. Thanks.

84CJ7 SOA,35's,OnboardAir,Dual winches,Full Cage,Snorkels, and more
OverMost 4WD Club

 

I can't remember from the pics but how about a passenger side fender. Mine is a lil damaged and trying to find the cheapest replacement.
Also what gears might he have. I'm lookin for some 3.73 or 4.10 gears to balance everything out and get 5th gear back. I'll take the carrier to, my gears a lil too small to be using the carrier again.

 

Does he have the hard doors with roll up windows? If so, let me know how much.
Thanks,
Amy
24jeepin@newnorth.net

 

I would like the rear roll bar or whole cage section depending on setup, if still availible. Will be able to pick up so should be no problem. Please let me know. Thanks

Dirtybird
89 YJ 4.2, 4.0 HO Head with MPI, AX15, Procomp 4" Lift, MSD6a, and just gerttin started......

 

Let me know about front seatbelts.

Thanks,
Will

wmcfa@craftull.com

 

Brian,
Does your friend wants to sell the emergency brake assembly?
I'm in Central Jersey and I can take a look this Saturday. Please email me jerseyredjeep@yahoo.com

Thanks,

Nycjeep88 /wwwthreads_images/icons/cool.gif/wwwthreads_images/icons/smile.gif/wwwthreads_images/icons/wink.gif

Let's go baja in NYC and see how well your suspension holds up.... /wwwthreads_images/icons/smile.gif

 

I could use a front drive shaft. Also I could use the stock airbox setup. Email me @ achomanczuk@hvc.rr.com. I'm in lower NY

97 TJ- If it ain't broke, it will be.

 

I could use the front seat and the flares. emai me
bigrubberjeep @ yahoo.com

 

how much on the steering box?

JR

The road is calling, Ignore it!!
There is life after asphalt.

 

what do you want for the side view mirrors and the sun visors? Thanks- Tim cbcarchives@aol.com

/wwwthreads_images/icons/smile.gif

 

the hood?

 

You probably don't want the hood!

Rick -- 80s CJ7, under construction since June

 

I'm interested in the fender flares. Let me know a price.
kevindyke6@comcast.net

1989 YJ/4.2
4" Superlift/33x12.50/4.56

 

I'd like to get the frame, but shipping it from NJ to CA would kill me.

September 11, 2001- We will not forget! We will not forgive!

 

I would be interested in the rear driveshaft. Please give me the measurement of the shaft (from center of u-joint to center of u-joint) and a price.

"It's a Jeep thing... and I DO understand"
Duct tape, WD-40, and a BFH, what else do you need?

 

how much for the engine? miles etc? thanks

Cecil

 

Are the hood latches broke? if not how much$? Thanks:

Rodney C

 

dibs on the rear tail lights, a car wash ripped mine off.

I also never got the little clips that hold the back seat in place.

oh yeah the plastic things on the side of the door, I'll describe that better later

jebusluvsme@yahoo.com

 

Ok guys,

Here is a list of items that everybody has been asking about. I will talk to Mudman99TJ@msn.com tonight to see what he says. I appreciate you all being patient. We are hoping to get this done asap. Thanks

Passenger side fender - looks ok at this point
Gears? - Um, if you read the post, he's keeping the rears.\
Hood - You dont want it.
Roll Bar
Front Seat belts
Emerg. Brake Assembly
Front Drive Shaft, I think he will end up keeping this.
Airbox setup - Its been modified with a snorkel, he is keeping it.
Front Seats
Steering box
Doors, and mirrors - He is going to keep them
Visors,
hood latches - exploded.
Frame? - Can you pick it up?
Tail lights
back seat parts.

84CJ7 SOA,35's,OnboardAir,Dual winches,Full Cage,Snorkels, and more
OverMost 4WD Club

 

Is the rad still good?

If so let me know a price.

rjmarquardt@hotmail.com

Far better to remain silent and thought a fool,
Than to open your mouth and remove all doubt

 

I need a set of stock swaybar connectors.. Let me know

97 TJ 31's and mostly stock but seeing what I can do about that..

 

Don't forget to ask about the rear driveshaft.

"It's a Jeep thing... and I DO understand"
Duct tape, WD-40, and a BFH, what else do you need?

 

How about the Fuel injection system with the computer and fuel pump? If he is willing to sell please e-mail me at bretts_yamaha@hotmail.com Thank you, this may be a life saver.

Sorry, my YJ is a 90, not an 87.

 

Is that a 4.0 or 2.5?

John http://www.geocities.com/ratherbejeeping/
95.5 YJ with "stuff"
01 WJ bone stock. And the wife says it'll stay that way... for now
http://www.SonsofThunder4x4.com