Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,976 Posts
My guess would be a broken tranny or motor mount, when you slowly release the clutch there is an even power start up on the drive train, with a quick or near normal release there is a surge put on the drive line and that causes upward or right hand torque. this would cause a surge or vibration on your Jeep. Also you may have a broken finger on the clutch pressure plate.
GP'n

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top