Off Roading Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
1,929 Posts
Discussion Starter · #1 ·
I have accumulated all the parts necessary to complete my on-board air system. I need to fabricate a mounting bracket for my York compressor and determine the belt routing. Did any of the 258's have AC that used a York compressor? What years? I would like to see a factory setup to help in the fabrication of my bracket and in determining the best way to run the belts. I have looked at several sites that describe an on-board air installation but haven't found one that relates to my setup. I am installing a York compressor onto my '85 CJ7 with 258, have you seen a site that describes this? Let me know.

Thanks
TOM85CJ7

1985 CJ7 4.2L, T-176, Dana 300, 2.73 gears(too high), 2.5" lift, 31" tires, Durabak
 

· Registered
Joined
·
1,929 Posts
Discussion Starter · #4 ·
Can I mount a York sideways?

Can I mount a York sideways and not get oil from the reservoir into my air system?

Thanks

1985 CJ7 4.2L, T-176, Dana 300, 2.73 gears(too high), 2.5" lift, 31" tires, Durabak
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top