[Guest]

Is there any seats out there that I won't have to modify to fit my old beast. I need new ones pretty bad. If not, will any Jeep seat be approx the same width as mine? I've been looking at seat for '76 and new CJ's.

 

[NoBucks]

Welcome!

Are you looking for junkyard replacements or new seats?

I put TrailMax seats in my Jeepster and I really like them. They also have lowback Classics that look like the originals. My seats bolted right onto the stock bases with no modification.

 

[1078]

Does any cj seat work? I'm putting hi-back vinyl Vega setas in mine, but I haven't started the fabrication.... woo hoo, the almighty Vega lives!

 

[Guest]

Where in Thurston county do you live? I could show you what I have in mine and give you some ideas maybe.

 

[Guest]

I live in Rochester on the South side of the county, but work in the North end just off the Hawks Prarie exit. I'm always into checking out another Commando.

 

[2216]

What year trailmax seats will fit and will they also go into a 72 Commando? Thanks Nate

 

[2216]

Also how about junk tard seats for a 72 ? Sorry for the extra post! Nate

 

[Miket]

I put some buckets from a full size Cherokee in mine. They are larger in the rump area and have a bit more padding. I only had to drill one hole in each side of the existing mounts for them to fit. Make sure you get the sliders with the seats. I think I gave the guy $25 at the junk yard for them.

 

[3018]

I put 90 Subaru Legacy seats in mine. THey are super comfy and great for long hauls. Plus they dont look to bulky.

 

[Danger_Dave]

How hard was it to install the Legacy seats? Any special brackets or anything?

 

[uglyjeepoffroad]

Mitsubishi Eclipse seats. Flat mount. You can mount the whole slider to the floor, or lift it a little for better veiw.

 

[3018]

I just whacked a little out of the factory jeep mounts used the stock legacy sliders and I was off and running.

 

[NoBucks]

TrailMax seats should fit all years of the Jeepster and Commando since, as far as I know, Jeep used the same seat bases for both models.

 

[3097]

The good news is I have a set of all three seats that are in so so condition. The bad news is that I am in California near Sacramento. I was going to send them to a guy in Texas but UPS was having a fit over shipping. The seats could use a home.

 

[2216]

About the Mitsubishi seats ,what years are this easy to mount? I also was wondering if mounting flat means to line up the mounting holes and attach or create a few new holes? Is it really that easy? Nate

 

[Schmuck0]

Try a pair of late seventies early eighties bronco II seats. Extremely comfortable. Lots in junkyards. They can work as either a bench or individual buckets, some of the later ones can be electric, the passenger seat folds forward and slides about 18" to allow great access to the back seat. they are exactly the right width. The only problem is that the floor of the bronco is not flat so you have to make a little angle bracket to bolt the seat down. Try em. You'll like em.

.john