Off Roading Forums banner

4x4 Help

1654 Views 3 Replies 3 Participants Last post by  moozuki
I have a 94 Mazda (made by ford) 4x4. It has a push button (shift on the fly) 4x4, but the front tires do not engage. For example if my back two tires are stuck, and the 4x4 is engaged the front tires dont spin and make a "clicking" noise as I give it gas. Are my hubs locking? or does this mean my hubs are locking but the tires are not engaging. I am not too sure why the 4x4 is not working. I recently bought it used so dont know if I broke it, or it was like this when I bought it. Any advise or help would be great! Thanks! Jason
1 - 1 of 4 Posts
Here is a great little page. Yeah, it is for an Explorer. BUT, most of it transfers over. Goto Transfer Case Maintenance and work on cleaning up the electrical connection @ the t-case. Which is known to have problems from time to time.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.