Off Roading Forums banner
1 - 3 of 3 Posts
G

·
Discussion Starter · #1 ·
My 1999 Jimmy's 4 x 4 is not working. When I push the engage button on the dash both 4 hi and 4 lo blink a few times and goes back to 2 wd.
 

· Registered
Joined
·
38 Posts
See the other post in this forum to a link that wil help.
 

· Registered
Joined
·
38 Posts
truckboy's solution

:eek:ldcodger:It sounds like you have a short in the control module, or a shorted switch. This may not be too hard to trouble shoot yourself, if you purchase a repair manual. They can be bought at most auto parts stores for around $20, and have a full trouble shooting section. You can look this up, and see what it takes to test the control module and associated components.
Other than that, you may need to take it to a reputable transmission shop, preferably one that specializes in 4-wheel drive vehicles.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top