Off Roading Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,423 Posts
I've just finished swaping a '98 head onto my '80 block and I put 2001 manifolds on. If you use a post '95 head, you will have to use the newer manifolds because of the mounting holes. Vice versa on the '91-95 heads. I used the injectors and ECU from a '94 and the MOPAR harmonic ballancer. I like the results that I got from it, and I am just working out the bugs on my fuel delivery system. Motor has plenty of geddy up, even turning '35's w/ 3.31 gears!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top