Off Roading Forums banner
1 - 9 of 9 Posts

· Registered
Joined
·
2,131 Posts
Discussion Starter · #1 ·
31\'s rub on front springs?

So do 31's (10.5) rub on springs with a SPOA and 3 1/2 BS rims?
 

· Registered
Joined
·
3,040 Posts
Re: 31\'s rub on front springs?

With 3 3/4" bs (7" rim)and 31X10.50 hi-tec recaps (muds) and spoa
they did not rub on the springs. (I did pound in the seams on the body.) this is with stock springs. and that was twisted up.
It really depends on the tires. I know boggers will rub untill
you go 2" BS.

when I went to 33's and rear srings up front with CJ's in the back and M/L I went right to 2" bs(8" rim). no problems there,
other than some body rub that bump stops took care of.
 

· Registered
Joined
·
3,286 Posts
Re: 31\'s rub on front springs?

My new 31x ""13.5"!!! swampers on 2.5/2.0" backspacing still rub up front. I have yet to REALLY measure the backspacing, but they really stick out there for a 10" wide rim.

I do not have problems in the rear.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top