[Guest]

I have an '81 cj-7...formerly 6 cylinders, temporarily 3 cylinders (or a sum less than six anyway), now almost an 8. I'm looking for the brackets that go between the block and the rubber motor mount on the 304. Apparently the brackets from a wagoneer/cherokee/J-series will not fit the cj frame? The swap stands still 'til I find a set. Anybody have a spare set?

Thanks,
Jason

 

[Guest]

The wagoneer mounts will work or at least that wsa what I was told. When i did my swap I got my block mounts from Rosser. $26 shipped I think. Its been a while. Hope that helps.

K-16

 

[Guest]

I'm using the M.O.R.E. mounts - a bit pricey at $200, but certainly bulletproof.

canis
'82 CJ-7/360/727/D300/cobra, M.O.R.E. shackles, 1/2" steel bumper, 1" body lift and lots of ideas!

'96 ZJ - 4.0L/42re/np242/optima/cobra and other goodies