Off Roading Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
187 Posts
Discussion Starter · #1 ·
Theres a guy close to my house with a 87-91 F-250 that he sold the motor, trans, out of. He has the axles still on the truck.

Anyone know what they are worth? He's not sure what to ask.
I looked at the tag and the rear has limited slip axles are 4.10 gears. This is the Dana 50 IFS and 10.25 rear.
 

·
Registered
Joined
·
3,090 Posts
you could put them in fairly easy, but addapting the 50 to coils, or the bronco to leafs wil be your biggest snag. most yards wont part with a 10.25 for uner $500, but i just paid $150 for mine with 4.10.
the front, well, i would say offer him $300 for it if the steerings still good.
 

·
Registered
Joined
·
3,090 Posts
remember, they are heavy, hell i didnt een unload mine by hand, i used the loader, so shipping could be a b!tch.
 

·
Registered
Joined
·
975 Posts
Check it out first. Regular F250's had 10.25 semi-floaters and F250HD's had the full floater.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top