Off Roading Forums banner
1 - 1 of 1 Posts

Discussion Starter · #1 ·
i am having problems with my electrical some of my wires burned so now my blower motor wont work the question i have is-there is a female plug that is between drivers inner fender and the air filter housing it doesnt plug into anything it has three wires two orange and a gray/black one my wires burned and also melted this connector so i dont know how they should be wired if they connect together i just need to know how they connect to the plug any help would be greatly appreciated thanks

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.