Off Roading Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
314 Posts
Re: "Lincoln Locker\"

I welded my front d-30 with a AC stick machine and a 309 stainless steel rod while it was in the housing.I put the ground on the spider gears so the current did not pass through the bearings.A mig would be alot better.I like it,but I dont try to tear it up.I only use it on slippery surfuces.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top