well i have to do a spoa tonight. i think jai bird and i can do it in less than 3.5 hrs. no drive shaft extentions and a plate swap with exsisting shocks. and reuse the stock brake lines with a lowering bracket. the ultimate cheap lift. we will put 2 in over shackles to get it to flex a bit. and let the owner do any drive shaft mods. but more than likly he won't do any thing but run it on the deer lease just like i give it to him. so i will update tommorow,later mike
hey man, GO FOR IT!!!! if i can spoa my rig myself (no help cept to bleed brakes) in 8 hours flat, from runnin stocker, to spoa, 4.5 pads, longer lines front n back, AND, installing rear hybrid housing, you can do that spoa in 3.5...... go for it!!!! i know ya can do it man, i got faith in yins.........
Do unto others as you want done to you!
If you pack it in, pack it out!
well jai bird was helping me and we can do it with a set of brake lines in three hours flat no sweat. but i have air tools a big fork lift and one of the best fab shops you guys have ever seen. i didn't drop the brake line brackets on this one. i am making him get some. it is pretty easy after you have done 8 or so. later mike
Unless they hit the Keystone Light too hard my money's on them making it ahead of schedule.
He would've had that 16 valve motor, harness, gas tank, power steering and all the accessories yanked from that rolled Tracker in 3 1/2 hours if I wouldn't have been holding him back. Hell I never seen wrenches with hoses hooked to them before.[img]/wwwthreads_images/icons/smile.gif[/img]
I used to think Mike was an ok guy... until I found out he drinks light beer.
we did it in about 3.5 hrs and we were drinking beer and screwing off. we can do it under three easy if we had the brake lines. making the z link kills about 1 hour by itself[since we learned that they needed to be bomb proof].we can pull both axles and have them on a cart in about 3o mins easy. later mike