Well Samit sami RTI 1000 on a 30! And drives very nice on the road. (Wheeln) it would go places in 2wd and the ARB off that it would not go in 4wd before with the old setup......Here are some pics

DRIVE IT LIKE YOU STOLE IT

SHAFFER [email protected]

Attached Images

File Type: jpg

28-469072-Im000076.jpg (84.5 KB, 8 views)

you might want to put some air in that back passanger wheel looks a little FLAT! LOL. cool setup and it drives good on the road darn when can i get mine

RUN IN TO YOU LATER

had to let the air out so the tire would rub huh?

RUN IN TO YOU LATER

Cool set-up! I like the looks of it. Wish I had the $$$ to get one now! That would look sweet on some Toyota axles and 35" Boggers! What size tire are you useing with the test vehicle? How much lift can you get with your kit?

-Brian
<font color=blue>THE ULTIMATE ZUK</font color=blue>
http://www.geocities.com/brianconrad1/

any other pics?

Mike thanx for putting the PIC up.
What a change from the calmini 5" lift. I am getting about 43 " up the ramp in 2 wheel drive on a 30 degree ramp,
{scored a 1000 on the RTI ramp) as before with the other lift I only got 15 " up the same ramp with all the locker hooked up. { note they is no drive shaft in the front end in the PIC.}.
The tires are the 33 MTR's on 2" back spaced rims. The tires tuck into the sami well.


86 Sami,shaffer coils front & rear,33's MTRs, 4.16 Tranf,5.43 axle,ez-lock front,ARB rear,Disk brake rear,cutting brakes,Toy Pwr Steering,Mini sami trailer.{Uses front clip & rear tub welded as One)

.

DRIVE IT LIKE YOU STOLE IT

SHAFFER [email protected]

Attached Images

File Type: jpg

28-469255-Im000074.jpg (95.1 KB, 7 views)

Hey , where can I get this kit , I mean I have to have it now!!! Ok not really , but I would like to have all the info on it , so I know how much to save for it. Please send me everything you know...Thanx

Mike, I am helping Tim Evans install the suspension on his zuk. As I'm sure you know, time is of the essence. Could you tell me what brackets, hangers, shackle mounts I can go ahead and cut off now. I was afraid to cut anything other than the front upper shock mounts off today for fear they would be needed for measuring points. Your input would be greatly appreciated. Also, from the first pic you posted it looks like the frame is notched where the rear coils locate. Any info on this would also be appreciated. Thank you.

Scott Whitmore
"It's not that it's able to do the job. It's that it does the job so well"

suzukisjw, might want to email Mike Shaffer at [email protected] or call him at 775 885 9944

86 Sami,shaffer coils front & rear,33's MTRs, 4.16 Tranf,5.43 axle,ez-lock front,ARB rear,Disk brake rear,cutting brakes,Toy Pwr Steering,Mini sami trailer.{Uses front clip & rear tub welded as One)