well guys, i did the diff breather thing today, and i found out that the breather cap for the tcase is not 1/2 inch, it is 3/8's. i was highly irritated when i had to go back to home depot for the third time of the day. i coulndt find any adapters to make the hose go from 1/2 to 3/8's, so i soaked the smaller hose in warm water for a few minutes and then forced it onto the 1/2" T adapter. its not going anywhere now, especially since i put a hose clamp on it. i didnt do the transmission because it seems to be high enough since i dont do through deep water(since id ont have a snorkel). now though i can change my gear oil and not worry about it getting all watered down. all in all an easy mod, i just wasnt as prepared as i would have liked to be. im eager to get the suspension stretched out so that i can see if i left enough slack for the flex (i left alot of slack, and i dont flex all that much, so im sure i did ok). i just want to make sure that the hose doesnt get kinked or caught on something.
oh well, thats all i got, just thought i would fill ya'll in and let you know about that tcase breather.
'88 Suzuki Samurai
2" S/R 30x9.50 M/T's
Texas A&M Off-Road
FTAC of 2003