hey there dude, i dont know if i would do it or not. a 1250 is for a wider rim. dont know specifics. i got a 33/950 on a stock sammy rim, but it hangs on the tailgate for a spare, dont know how bad/if it rubs at all. never been on the truck. mee's tinks it would be too narrow and ride in the middle of the tire unless you run very very low pressure. just opinions.
Do unto others as you want done to you!
If you pack it in, pack it out!
MUD is your friend baby!!!!!!!!!!
I run my 33x12.5's on 8" rims, and am going to 7" rims for wheeling. Never peeled a bead or anything, just like the looks of them better. I wouldn't on a stock rim, <font color=blue>mxnhid</font color=blue> has a set of 32x11.5's mounted on stock rims and they look like they'd peel a bead in a minute. I wouldn't recommend it.
Winter Harbor, Maine
'81 CJ-8 Scrambled!
It's a Jeep, Chevy, IHC kinda thing!
Minimum wheel width for a 33x12.5-15 is 8". That is by the book and I don't think anyone would mount a tire on anything smaller than 8". You might be able to get away with a 7" rim with no problems. I mount my own tires but even I think you are taking a big chance of a blow-out running that narrow of a rim.
87' Samurai, 5.5" SPOA, 31's, 1" shackle lift, Hi-lift jack, everything else bone stock.