My Autoshop here at school is looking to build an RTI ramp. And instead of just winging it, I thought I might ask the experts!
Do any of you out there have the specs on how to build one? IE Length of metal (We're building a 20 Degree one), amount, ect.
If you do, please post it here, I would be greatly apriciative!
there is no set length for the ramp you just need to build it long enough for the vehicles you plan to ramp. just remember that it is easy to max out a short 20 deg. ramp. i would build it at least 12 ft. long. you could get away with 10' but why bother. later mike
88ht,two87s,88.5 spoa,33X12.50,5.12 f&r,rock cage,4.16 T case