Join Date: Apr 2000
Location: western MA. USA
Thanked 0 Times in 0 Posts
Re: Snorkle instructions?
Well I had a problem of not enough air into the engine, (Hesitation etc, ) once I increased the volume of air to the engine it stopped and ran great. so Justins design didn't work for me. (I have a lightly modified motor Cam,header
etc.) So I went up in size for the air intake. I reused the stock airbox for now. blocked the stock hole and made a
new one with an aluminum flashing piece for down spouts. I connected that to the fender with a piece of fexi-down
spout connecter and used another flashing piece for the connection through the fender into the drain pipe.
everything is sealed with RTV. It runs the side of the fender (Outside) up until the door hinge and then uses an
elbow to go up about another 2' to two more elbows connected to each other for the intake. I really need to take
a picture of it and post as this discription isn't too good. Works great no problem with lack of air now.
87' Zuke Spoa, 31's, 4.16 tcase, Camo,Header,2"exhuast, Cam.
Locked both ends, 8klb winch, Snorkel -Wildweasel2