Join Date: May 2002
Thanked 0 Times in 0 Posts
Re: My Samurai Quit Running
If it was the fuseable link, it wouldn't turn over.
Are you getting spark? pull the coil wire out of the disty and crank it. Ff it won't arc to an engine ground with say a 1/4" gap or so, (not a critical distance) look at the coil and the disty guts. You might also try disconnecting the ECU, that will isolate the ECU in case its fried and grounding every thing.
Any idea what blew? If you don't find that, it could happen again. I would suspect a short in the freid section of the harness, but...