Finally finished installing my Shrockworks rear bumper for the Zuk. It was almost too easy to install. Other than the fact that the prior owner of the Zuk tack welded the tow bar on. I had to grind them off which was a bit time consuming. The fitment was too perfect. I actually thought I was doing somehitng wrong.
More time consuming than a PITA. Only because I used the wire connecter that you heat shrink after crimping. I clipped the wires as close to the old lights as possible and only did one at a time. Installing them into the bumper was easy. Here's some more pics and link to pictures of the complete install: Bumper Installation
Here's the wires all crimped with the new connectors for the bumpers new tailights.