Thanks! Those are 32x11.50-15 Swamper SX's on 15x8" American Racing type 676 black spokes. I added a 1/4" spacer behind each wheel to help with rubbing on the front springs, still rub a little when aired way down. The tires are not a true 32 inches tall, more like 31" when they were new.
The front hoop and two of the connector bars are from the Dave LaTourette add-on kit that Glenn sells. That's the original roll bar with the kicker legs removed. The rear part is a Chris Robbins design, bent with my $100 pipe bender from Northern Tool. All made from 1.5" pipe with .120 wall.
I made those from 2x4" steel, 3/16" thick. Rear is tied into the original tow bar holes and the two rear body mounts.
Hey CSR, is the add-on cage kit from RRO bolt on or does it require welding. If I bought the front part maybe you would consider helping out with the back part. If you are interested I could send you a private e-mail. Maybe some others would be interested in your design.
The Davesport add-on is a weld-in kit. The front hoop is mandrel bent and fits great.[img]/wwwthreads_images/icons/smile.gif[/img] The kit comes with two front hoop to main hoop connector bars, floor plates and backing plates. The bar over the dash is already welded in. I added another front to main connector to mine for more protection and to keep my bikini top from sagging in the middle. [img]/wwwthreads_images/icons/crazy.gif[/img] Send an e-mail to the address below if you want and we can take this off of the board.