I just recived my power steering set up today from Brent. I was wondering if there is any tips anyone has for it. It seems to be strait forward but my photo copy instructions are not very clear. Any info would be very much appricaited!!! By the way Brent if you read this thank you very much!! TOM
when you go to install the box and drill the holes in the frame, try and get it so the pitman arm wont be pointing up towards the windshield or your pitman arm will come very close to hitting the frame if not smacking right in to it.
The lower hole you have to drill for the steering box bolt should be as close to the bottom edge of the frame rail as you can WITHOUT cutting through/across it. This will give you the most clearance for the pitman arm. Also, be sure to use the spacer sleves.
I got my bottom one as close the the bottom of the frame as I could. I even had to shave the spacer so that it would fit, anyways, about the power steering cooler, I bought a small transmission cooler for mine.