sun 62 has the motor tranny and transfercase from the lx7 in there but it is only setting on temp mounts the one thought is the drivelines are a slip yoke on the front and rear of the t case and it used a 2 piece rear driveline so the issue of the splines not alowing for the slip needed has come up sinse the old ones only needed to take up flex of the frame and such the thought has been to use the slipyoke bolted to the output shafts making a fixed yoke but then the u joints may not handle the angles
I'm moving forward slowly, been to busy at work. Have the body off the frame now. I'd post a couple pics but for some reason it say's my file size is to big. They are the same size that I've posted before.