Join Date: Aug 2001
Thanked 0 Times in 0 Posts
Hopefully the last detail.. 97 swap, brakes weak
Everything's done but I have manual brakes! The brake light in the cab stays on, the fluid level is fine, but when I step on the pedal, it feels like the engine is off and the brake is primed = stiff pedal at the top and weak stopping power. I did have to splice the two wires from the cap of the existing reservour to the two wires that went underneath the reservour on the tracker. I did a 1" body lift. Please tell me that I don't have to swap the master cylinders too!
I had hoped tightening the four clamps that connect the two hoses between the engine and the master cylinder was the answer. It was not. They do not appear kinked. I do not have a bottle of propane for the vaccuum test... The car idles fine, though.
This is the last detail (I hope) before I can be inspected. Any ideas are appreciated.
Thanks in advance,