Re: Yota Axle pinion angle w/Yj\'s????
I put my YJ springs in, put my stock axle back in & wheeled it for a few months while I was rebuilding the Yota axles, dropped out the stock rear axle & bolted in the Yota axles with the spring mounts NOT WELDED YET, snugged down the u-bolts with the axle centered, used a double cardon/c.v. drive shaft so I pointed the center of the yota axle flange toward where the center of the t-case flange. Tack welded the spring mounts, dropped the axle back out & finsished welding up the spring mounts in good shape.
I have some pretty good driveline vibration though just so you are aware.