Off Roading Forums banner

Oil pressure guage, repairable???

401 views 3 replies 3 participants last post by  fratt77CJ7 
#1 ·
Autometer oil pressure guage started leaking at the back so I took it apart and proceeded to break the little "collar" that goes around the tubing, inside the compression fitting. Any ideas on whether I can fix this or not? Can I get another piece for this or do I have to buy a whole new guage?
 
#2 ·
In reply to:

so I took it apart and proceeded to break the little "collar" that goes around the tubing, inside the compression fitting

[/ QUOTE ]

Yes this can be replaced,,, head to any parts house and ask for a wet line kit for a remote mounted oil guage. You will get the complete setup , hose fittings and ferrel rings, (the part you are asking about) and nuts.

The other option is to take the broken part to Home depot, Lowes and look for a 1/8" ferrel for plastic tubing.

Either way and you are set.
 
#4 ·
Sweeeet. Thanks guys. I was just a little worried since I asked the local parts counter monkey and he had no clue. Should have figured that he wouldn't. Thanks again.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top