Off Roading Forums banner

pictures of rocker replacements

2K views 3 replies 3 participants last post by  cheepster 
#1 ·
Hey guys I am looking for som pictures or even video of people
replacing their rocker panals.there is a pic on one of my other postings
that I really like.If i cut them do i need to leave that little beveled portion
that continues through the fenders.I have read other treads on people
who have cut everything out and then had a problem with their door
opening and closing.I am a newbee to this stuff and would appreciate as
much info on the subject before I start hacken on this jeepster.

thanx Jess
 
#3 ·
rocker replacement

I used 3/16 plate. I cut 3 separate pieces and used self drilling screws to fit them up over the old rockers and tack them together so i got the angles correct. I then took them off and cut the old rockers off but left the sheet metal directly under the door on the jeep to help mount the new rockers on. if you skip weld the new rockers to the sheet metal and control your heat it will not warp.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top