Off Roading Forums banner

84' 4.2 Intake on 94' 4.0L

780 views 1 reply 0 participants last post by  **DONOTDELETE** 
G
#1 ·
84\' 4.2 Intake on 94\' 4.0L

In hopes of getting my Jeep back on the road for the summer, could i take the intake manifold and Weber 300 cfm carb off my no functioning 84' 4.2L and put it on a 94' 4.0L?, till I save enough for the EFI goodies (wiring harness,MAP sensor, Speed Sensor, Electric fuel pump, etc.)
 
G
#2 ·
Re: 84\' 4.2 Intake on 94\' 4.0L

You will find it will fit, if you relocate the dowel holes in the intake manifold, match up the ports using a 4.0l intake gasket, and redrill or file the dowel hole in the right location. a witness nark on the gasket and/or head will help in lining it all up. You may have to make clearancing cuts for the 4.0 exhaust manifold, so check your clearances carefully!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top