Off Roading Forums banner

Ubolts D44

423 views 1 reply 1 participant last post by  WILL 
G
#1 ·
I just recently purchased the Black Diamond 3" lift warn and the hardware kit. After looking things over i noticed that the Ubolts will not fit my d44 on my 86 CJ7. So i called warn and they will ship me new ones, but i need to tell the right size. I know this was the case with other on the board. What size do you need? Thank You

 
#2 ·
i had the same problem when i changed my amc20 for a 44. the 20 uses a 2 1/2" tube, the 44 uses a 2 3/4" tube. i was able to rebend mine using a hammer and c-clamp with the tube. good luck.

79/CJ-7/AMC360/TH400/Q-TRAC/d30/d44/33's/RS9000s/Herculiner/Pro-jection 2D
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top