Join Date: Mar 2001
Location: Tecolutla, Veracruz Mexico
Thanked 0 Times in 0 Posts
Re: New LED turn signal lights
The lights came from a semi truck parts department. They are the 4in LED lights. They match the red ones on the back.
The istalation was easy. Plug the original holes with galvanized and then smooth with bondo(very little). Drill out the holes with a 4.5 in hole saw. I moved the center out 1 in from the original center of the lights, be careful and don't go more because you run into the fender. After the whole is cut you will need to trim away some of the remaining support metal from the original lights.