Join Date: Dec 2000
Thanked 0 Times in 0 Posts
Help! Carb Issues on Initial Rebuild Startup!!!
i just tried to fire up my rebuilt and re-wired 304. Engine good, fuel control bad. i had bought a Motorcraft ReMan from Holley and it is shooting fuel out the top vent holes. Also, the accelerator circuit (pump) does not squirt any fluid when the linkage is pulled. The engine will run, then the pump catches up, and starts pouring fuel out the top of the carb, then the fuel is sucked in the top, thus flooding.
i'm trying to think of other possibilities but i keep coming back to carb blame. Any suggestions or previous experiences are greatly appreciated. i just want to Jp...